How To Make a Smoke Absorber Machine Working Model

In this video post we write about making of the Smoke Absorber Machine Working Model Simple and Easy for exhibition using dc motor and battery

What is smoke absorber machine?

A smoke absorber machine is a device that is used to remove smoke and pollutants from the air.

#smokeabsorber #pollutionabsorber #machine #workingmodel #howtofunda #howtomake #howto #howtofunda #inspireaward #inspireawardproject #awardwinning

Making of smoke absorber machine using a DC motor and cardboard

A smoke absorber machine using a DC motor and cardboard as a filter material is possible, but it would likely be a homemade or DIY device.

DC motors are commonly used in small, portable devices because they are efficient and easy to control.

They can be powered by batteries or a DC power supply, making them a good choice for a portable smoke absorber machine.

Cardboard is a cheap, readily available material that can be used to create a filter for the machine.

It can be used to construct a filter box or compartment, which would be placed in front of the fan motor.

The smoke would be pulled through the cardboard filter by the fan, trapping particles in the cardboard fibers.

It’s important to note that this type of smoke absorber machine would likely not be as efficient as a commercially available machine

Steps for making a smoke absorber machine using a DC motor and cardboard:

  • You will need a DC motor, a cardboard box or sheet, a power source for the motor (such as batteries or a DC power supply), and any additional materials you wish to use to construct the housing for the machine.
  • Cut the cardboard into the desired size and shape to fit the front of the fan.
  • Attach the fan to the motor and make sure it is securely fastened.
  • Place the filter compartment in front of the fan and secure it in place. Connect the power source to the motor.
  • Turn on the motor and observe the airflow through the filter. Make any necessary adjustments to the placement or tightness of the filter.
  • Use and maintain the machine: Position the machine near the source of smoke and turn it on. Be sure to replace the cardboard filter regularly, as it will become saturated with smoke and pollutants over time.

It’s important to note that this is just a basic idea

Step by Step Video Guide to Make a Smoke Absorber Machine

Leave a Comment