Connecting two DC motors to a single battery is a straightforward task. Here’s how to do it, with both motors running simultaneously from the same power source:
Materials Needed:
- 2 DC motors
- 1 battery (ensure it provides the appropriate voltage and current for the motors)
- Wires
- Soldering iron and solder (optional, for secure connections)
- Electrical tape or wire connectors
Step by Step Video Instructions:
1. Prepare the Components:
- Identify the positive (+) and negative (-) terminals on each motor.
- Identify the positive (+) and negative (-) terminals on the battery.
2. Wiring in Parallel:
- Parallel wiring ensures each motor receives the full voltage of the battery, and the motors will run independently.
- Cut two lengths of wire for each motor, one for the positive connection and one for the negative connection.
3. Connect the Positive Terminals:
- Connect one end of a wire to the positive terminal of the battery.
- Split this wire into two wires (using a wire connector or twisting them together).
- Connect each of these two wires to the positive terminals of the two DC motors.
4. Connect the Negative Terminals:
- Connect one end of another wire to the negative terminal of the battery.
- Split this wire into two wires (using a wire connector or twisting them together).
- Connect each of these two wires to the negative terminals of the two DC motors.
5. Secure the Connections:
- Ensure all connections are secure and insulated using electrical tape or soldering for a more permanent connection.
6. Test the Setup:
- Once all connections are made, test the setup by turning on the battery. Both motors should run simultaneously.
In this setup:
- The positive terminal of the battery is connected to both motors’ positive terminals.
- The negative terminal of the battery is connected to both motors’ negative terminals.
By wiring the two DC motors in parallel to a single battery, each motor receives the same voltage, ensuring they run effectively from the shared power source.