how to make sprinkler irrigation system working model

In this post we have given instructions on how to make sprinkler irrigation system working model | DIY agriculture inspire model | howtofunda

Creating a sprinkler irrigation system using a sketch pen is an innovative and fun project that demonstrates the principles of water pressure and flow.

Materials you will need:

  • Sketch pen (empty and clean, with the refill removed)
  • Thumbtack or pin
  • Plastic straw
  • Rubber band or tape
  • Water & Pump
  • Tray or container to hold water

Step-by-step instructions:

  1. Prepare the sketch pen:
    • Take an empty and clean sketch pen, making sure the refill has been removed. The sketch pen will act as the main body of the sprinkler.
  2. Create the sprinkler nozzle:
    • Use a thumbtack or pin to carefully puncture a small hole near the tip of the sketch pen. This hole will serve as the sprinkler nozzle.
  3. Insert the straw:
    • Cut a plastic straw to a length of about 3-4 inches (7.5-10 cm). Insert one end of the straw into the hole you made in the sketch pen, so the straw is connected to the pen and extends outwards.
  4. Secure the straw:
    • Use a rubber band or tape to secure the straw in place, ensuring it’s firmly attached to the sketch pen. The straw should point away from the pen, acting as the sprinkler arm.
  5. Set up the system:
    • Connect the sketch pen with water pump from water container
  6. kler in action:

This simple model demonstrates the concept of a sprinkler by utilizing water pressure to create a spray effect. It’s a fun and creative way to explore the basic principles of irrigation and water distribution.

#sprinklerirrigation #workingmodel #agriculturemodel #diy #howtofunda #howtomake #inspire #inspireawardVideo step by step on sprinkler irrigation system working model

Leave a Comment