In this post I will be writing on how to make hydroponic farming working model for science exhibition at home very easy diy for inspire award science project
Creating a hydroponic farming working model using plastic trays, pipes, a DC water pump, and plants is a fantastic project to understand soilless farming. Here’s a detailed guide on how to set up a simple hydroponic system:
Materials Needed:
- Plastic Trays: Two trays – one for the plants and one for the nutrient solution reservoir.
- DC Water Pump: Small pump to circulate the nutrient solution.
- Pipes/Tubing: To carry water from the reservoir to the plants and back.
- Net Pots: To hold the plants.
- Growing Medium: Like clay pellets or rock wool to support the plants.
- Nutrient Solution: Water mixed with essential nutrients for the plants.
- Power Supply: Compatible with the DC pump.
- Timer (optional): To automate the pump operation.
- Supporting Structure: To hold the trays and pipes.
- Drill: To make holes in the trays and pipes.
- Silicone Sealant: To seal any leaks.
Step by Step Video Instructions:
1. Prepare the Plant Tray:
- Drill holes in the plant tray to fit the net pots. The holes should be spaced to allow each plant enough room to grow.
- Insert the net pots into the holes. Ensure they fit snugly.
2. Set Up the Reservoir Tray:
- Place the second plastic tray below the plant tray. This will serve as the nutrient solution reservoir.
3. Install the Water Pump:
- Place the DC water pump inside the reservoir tray.
- Connect the tubing to the pump’s outlet. This tube will carry the nutrient solution to the plant tray.
4. Arrange the Piping:
- Route the tubing from the pump to the plant tray, ensuring it can deliver the nutrient solution to all net pots.
- Drill small holes in the tubing above each net pot to allow the nutrient solution to drip into the growing medium.
- Install a return pipe or tube from the plant tray back to the reservoir tray, allowing excess nutrient solution to flow back into the reservoir.
5. Set Up the Growing Medium:
- Fill the net pots with the chosen growing medium (clay pellets, rock wool, etc.).
- Plant the seedlings or seeds in the growing medium.
6. Connect the Power Supply:
- Connect the DC water pump to a power supply. Ensure the connections are secure and safe.
- If using a timer, set it up to control when the pump turns on and off, ensuring a consistent flow of the nutrient solution.
7. Fill the Reservoir:
- Mix the nutrient solution according to the instructions and fill the reservoir tray.
8. Test the System:
- Turn on the pump and check the flow of the nutrient solution through the tubing.
- Ensure the solution is evenly distributed to all net pots and that the excess solution flows back to the reservoir.
Conclusion:
This simple hydroponic farming model effectively demonstrates how plants can be grown without soil, using a nutrient-rich water solution. It’s an excellent educational tool for understanding hydroponic systems and the basics of soilless agriculture.
#hydrophonic #farming #workingmodel #scienceproject #scienceexhibition #howtofunda #inspireaward #inspireawardproject